Dishwasher not using soap - this is the biggest trouble for many dishwasher users. This issue is detected when dishwasher completed the washing cycle and the soap is still in the dispenser. This shows that there is a fault in either in dishwasher or dispenser that restrict the cleaning process. There can be some reasons responsible for it, like broken, shabby or lost elements. And, other issues can be related to soap quality or water heating temperature in the dishwasher. That effect dishwasher processing.
1. Jammed Dispenser Door
Jammed dispenser door is a most likely issue in all dishwasher. This arises due to using heavy soap or detergent for cleaning. Therefore you need to check the dispenser door if found it to be jammed then use hot water to clean it. Once it gets properly cleaned, the door can be freely shut and open.
2. Low Water Temperature
If you found the unaffected detergent tablet in the dispenser, there could be the reason that water entering the dishwasher is not as hot as required. For this, you can switch between two alternatives. Either to choose liquid detergent or check the water heater. If you choose the change or water heater, keep in mind, the ideal temperature must be between 55°C to 75°C in your dishwasher. You can also use thermostats for better actions.
3. Broken Spring
When the spring create an issue while opening or shutting, means it the right time to replace it. As this is not a simple task, and DIY can cost you more. Therefore, it's good to hire a dishwasher repair company nearby. Hiring an expert will save your time and money for buying equipment. On the other side, if you buy a wrong model dishwasher spring it can cost you almost double. But, if you prefer to neglect this problem, it will affect your dishes washing process. Because detergent enters during the washing cycle but not at the time when requires.
4. Worn Out Rubber Gasket
A rubber gasket is placed around soap container in the dishwasher. With the regular use, there are high chances for its wear and tear. Broken or worn rubber will start leaking the soap out from dispenser. And, before the washing process being your whole soap can be leaked. So, inspect carefully, if you found the issue related to the rubber gasket. It is advisable to replace it. You can also use Vaseline to moisturise it. This will also help in smoothly replacement
5. Broken Soap Door
Unfortunately, if you found the broken door of your dishwasher. It could be a troubling factor for you. This happens mainly in the old dishwasher. And, the biggest problem arises in finding the same model door. If you are able to succeed in search, it will be a great job. Otherwise, replacing a complete dishwasher will be the only option for you.
6. Timer
Modern dishwasher operates detergent process according to the prescribed timer. It starts and finishes it’s washing cycle as per mechanically installed timer. Therefore, it releases the detergent during the washing cycle as per timing. This can also be an issue in your modern dishwasher. Check the link-time between door and washing cycle. If there is a difference found to try to set as per requirement otherwise replace it.
Bottom Line
Trying these simple tips will help you to come out of the dishwasher not using soap issue. But, if these do not work effectively, then call your nearby dishwasher repair company to get expert assistance. For example, if you are using Ge Dishwasher, then searching on the internet with Ge Dishwasher Repair Montreal will help you. All the Best for your self-repairing.
